The 4 Most Unanswered Questions about

The Importance of Colors of Underground Utility Lines

If you find underground utilities, you can easily determine what type of utility it is for. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. Today, the risks have been lessened although not completely eliminated. In order to prevent harm, it is important to know or identify these utility lines if your need to dig the ground. The OSHA requires that utilities underground first be located before digging through a piece of land. Otherwise it can be something disastrous. Fatal injuries can happen if underground utility lines are struck. Services in the area where the lines are located can experience interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.

Sometimes, even if the lines are marked accidents still happen. The reality is that there is an incident almost every 6 minutes where utility line are struck. Traffic lights, wastewater pipes, telecommunication lines, etc. are affected when lines are struck. These incidents affect public health and safety.

With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. With this machine, companies can easily locate utility lines. Companies can locate their utility lines if any property owner calls 811.

There are certain colors that mark different utility lines for easy identification. The colors below indicate the kind of utility uses it.

White lines are for proposed excavation sites. You can mark areas with white lines that will soon be excavated.

Pink lines are temporary survey markings. Surveyors use pink lines to mark off legal property boundaries.

If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. This color is appropriate for electrical works since it is associated with fire and danger.

If you see yellow lines, then they are lines for gas, oil, steam, petroleum, and gaseous materials. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.

If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. Blue lines are used for potable water. If you see purple lines, that this is for reclaimed water, irrigation and slurry lines. Sewer and drain lines use the color green. Hitting this line can truly derail any project for a long period of time.

Click here now if you want to learn more about the color coding of utility lines. View here for more.

Refer to: try this out